2345彩票代理歡迎您的到來!

2345彩票代理(蘇州福盛泰物流設備有限公司東北辦事處)
您現在的位置:首頁>>門封,卸貨平台新聞 >> 「移動登車橋」8噸移動等車橋的技術說明

    「移動登車橋」8噸移動等車橋的技術說明

    作者:沈陽移動登車橋   發布時間: 2019/7/28 10:01:45


  • 「移動登車橋」8噸移動等車橋的技術說明



    Technical Description of "Mobile Boarding Bridge" 8-ton Mobile Waiting Bridge

     

     


    登車橋用于無法安裝裝卸貨平台或折疊橋的場所,它無需要求建築物有固定月台,也不需要做特殊的準備工作。


    The boarding bridge is used in places where loading and unloading platforms or folding bridges cannot be installed. It does not require a fixed platform for buildings, nor does it require special preparations.
     

     

    沈陽移動登車橋



    當登車橋手動或者用配有安全系統的液壓系統打開後,用叉車将它移至卡車位置,使坡道降低直至接觸到車廂底部。


    When the boarding bridge is opened manually or with a hydraulic system equipped with a safety system, it is moved to the truck position with a forklift to lower the ramp until it reaches the bottom of the carriage.


    裝卸貨完成後,再次提起坡道,将其移至保存的地方。


    After loading and unloading, lift the ramp again and move it to the place where it is kept.


    登車橋可以更換更加适合低溫使用的油(最低-50℃)。


    The boarding bridge can be replaced with more suitable oil for low temperature use (minimum - 50 C).


    登車橋符合既定的規範和EN1398的相關标準。


    The boarding bridge conforms to the established specifications and the relevant standards of EN1398.


    電機采用工業門專用電機(德爾),每台電機配備一個控制盒,三鍵開關。


    The motor adopts industrial door motor (Dell), each motor is equipped with a control box and three-key switch


    遙控器采用自選碼設計,重複概率為1/1600兆,200米内遙控。手動/遙控(雙控)


    The remote controller is designed with optional codes. The repetition probability is 1/1600 Mb and the remote control is within 200 meters. Manual/remote control (dual control)


    軌道采用2mm厚熱鍍鋅鋼闆成型壓制而成,C型軌道 副軌高度為10.5m,确保門體運行平穩。


    The track is made of 2 mm thick hot-dip galvanized steel sheet, and the height of C-type track accessory rail is 10.5 m, which ensures the smooth operation of the door body.


    扭簧采用計算機設計扭簧平衡系統,可保持門體運動平穩、開啟順暢


    The balance system of torsion spring is designed by computer, which can keep the door moving smoothly and open smoothly.


    彈簧材料為60Si2Mn,油淬火材料,循環使用壽命達30 000次以上


    The spring material is 60Si2Mn and oil quenching material. Its cycle life is over 30,000 times.


    密封條為底部U型密封條,側部和頂部為快速嵌入式密封條


    The sealing strip is U-shaped at the bottom and fast embedded at the side and top.


    提升方式包括:标準提升方式、高位提升方式及垂直提升方式


    The lifting modes include standard lifting mode, high lifting mode and vertical lifting mode.


    可選配置包括:采光窗、通行小門、電機、手動鍊輪、安全氣囊及裝卸平台互鎖開關等


    Optional configurations include lighting windows, access doors, motors, manual sprockets, airbags and interlocking switches for loading and unloading platforms.

     

    沈陽移動等車橋定做

     

    「移動登車橋」8噸移動等車橋的技術說明



    Technical Description of "Mobile Boarding Bridge" 8-ton Mobile Waiting Bridge

     


    承載量                               8000KG(80KN)/10000KG(10KN)


    最大單位面積承載量                   标準-1.3N/mm²  可選-6.5N/mm²


    液壓缸電機功率                               1.5KW


    電壓                                      380V 3相


    控制電壓                                  24V


    控制模塊防護等級                          IP54


    液壓油                                Mobil DTE10 EXCEL


    工作溫度範圍                             -30至+50℃


    重量                                       3930KG
     

    移動登車橋」「沈陽卸貨平台」「沈陽卸貨搭闆」

     

2345彩票代理
(蘇州福盛泰物流設備有限公司
東北辦事處)
電話:024-31081023
聯系人:于經理
網址:www.ilid.com.cn
版權所有:2345彩票代理
(蘇州福盛泰物流設備有限公司東北辦事處)
  
電話:024-31081023
聯系人:于經理
百度地圖 - 網站地圖 -