2345彩票代理歡迎您的到來!

2345彩票代理(蘇州福盛泰物流設備有限公司東北辦事處)
您現在的位置:首頁>>提升門動态 >> 「沈陽電動提升門」廠房滑升門的結構組成

    「沈陽電動提升門」廠房滑升門的結構組成

    作者:沈陽廠房電動提升門   發布時間: 2019/7/26 9:57:18

  •  

    「沈陽電動提升門」廠房滑升門的結構組成


    Structural Composition of Sliding Door of Shenyang Electric Lifting Door Workshop


     



    問:提升門由哪些結構組成?


    Question: What structure does the lifting door consist of?


    答:工業提升門是現代工業廠房的專用門,它以門闆組成主要門體,通過上升、下降運行完成對工業廠房門的開啟、關閉控制,同時滿足現代工業廠房所要求的降噪、隔音、保溫、保濕、密封等效果。


    Answer: Industrial lifting door is the special purpose of modern industrial plant. It consists of door panels. It can control the opening and closing of industrial plant door by lifting and descending operation. At the same time, it meets the requirements of modern industrial plant for noise reduction, sound insulation, heat preservation, moisture retention and sealing.
     

     

    沈陽保溫提升門廠家



    工業提升門由哪些結構組成?工業提升門由門體、配件、平衡系統、安全裝置等多個結構組成,不同結構的部件要求也不一樣,如下工業提升門結構圖所示:


    What structure does the industrial lifting door consist of? Industrial lifting door is composed of door body, fittings, balance system, safety device and other structures. The requirements of components of different structures are different, as shown in the structure diagram of industrial lifting door below.


    「沈陽電動提升門」廠房滑升門的結構組成


    Structural Composition of Sliding Door of Shenyang Electric Lifting Door Workshop


    下面,「沈陽電動提升門」龍盛門業在詳細的給大家介紹工業提升門的各個結構部件:


    Next, "Shenyang Electric Hoist Gate" Longsheng Gate Industry in detail to introduce the various structural components of the industrial hoist door:


    1、門闆


    1. Door panel



    工業提升門的門體主體為門闆,它的組成是雙層彩鋼闆内填充聚氨酯發泡組成的,門闆常規厚度為40MM彩鋼闆的厚度為0.5MM,門闆表面經過壓紋處理,美觀大方。


    The main body of industrial lifting door is door plate, which is made up of polyurethane foam filled in double-layer color steel plate. The conventional thickness of the door plate is 40MM color steel plate, which is 0.5MM thick. The surface of the door plate is embossed, beautiful and generous.

     

    沈陽廠房提升門安裝




    在門闆兩側安裝鉸鍊位置設有連續鋼帶,以保證鉸鍊牢固安裝。


    ontinuous steel bands are installed at the hinge positions on both sides of the door plate to ensure the solid installation of the hinges.


    若電動提升門高度超出5m以上的,每塊門闆的内側面設置一條高80mm加強筋,可以保證門闆有抗十二級以上的抗風強度。


    If the height of the electric lifting door exceeds 5 meters, a 80 mm stiffener is installed on the inner side of each door panel, which can ensure that the door panel has wind resistance strength of more than 12 grades.


    2、安全裝置


    2. Safety devices



    安全裝置亦是工業電動提升門必備的配置之一,一般來說現在的工業提升門都配備有三重安全保護裝置:一是提升門的底部設有安全氣囊;


    Safety devices are also one of the necessary configurations of industrial electric lifting doors. Generally speaking, the industrial lifting doors are equipped with three safety protection devices: first, the bottom of the lifting door is equipped with a safety airbag;


    二是在提升門的底部兩端設有刀片式鋼絲繩斷裂保護器,阻止門體墜落。


    The second is that a knife type wire rope breaking protector is installed at both ends of the bottom of the lifting door to prevent the door from falling.


    三是在門體的下方兩端設有紅外對射裝置,一旦紅外光束被擋住,門體立即向上返回,直到開門位置。


    Third, there are infrared counter-fire devices at both ends of the lower part of the door body. Once the infrared beam is blocked, the door body immediately returns upward until the opening position.


    安全裝置的主要作用是:防墜落裝置、安全氣囊(可選),防止門體下墜或門底部與障礙物相碰時,門則自動停止或反向運行,免事故發生;


    The main functions of the safety device are: anti-falling device, airbag (optional), to prevent the door from falling or when the bottom of the door collides with obstacles, the door automatically stops or runs backward to avoid accidents;


    防鋼絲繩斷裂裝置、扭簧斷裂安全裝置。防止任何方式的門體傷害人、物的可能。


    Anti-wire rope breaking device and torsion spring breaking safety device. Prevent the possibility of hurting people and things by any way.


    3、平衡系統


    3. Balance System



    平衡系統主要是采用扭簧平衡,平衡扭簧根據門重負荷軟件計算而設計制作的扭簧,使平衡達到最佳狀态,在平衡軸上裝有扭簧斷裂保護裝置。


    The balance system mainly adopts torsion spring balance. The balance torsion spring is designed and manufactured according to the calculation of the door heavy load software, so that the balance reaches the best state, and the balance shaft is equipped with torsion spring breaking protection device.


    平衡系統作用:該裝置能在平衡扭簧斷裂時,防止門闆墜落;提升繩輪為鋁質柱形繩輪。


    Equilibrium system function: the device can prevent door panel from falling when the balance torsion spring breaks, and the lifting rope wheel is aluminium cylindrical rope wheel.


    4、其他配件


    4. Other accessories



    門闆連接鉸鍊為熱鍍鋅冷軋鋼闆沖壓制作。材料厚度δ=2.0mm,鍍鋅厚度大于28µm。


    The door plate connection hinge is made of hot-dip galvanized cold-rolled steel sheet by stamping. The thickness of the material is 2.0 mm and the thickness of galvanizing is more than 28 M.


    導軌為δ=2mm熱鍍鋅鋼闆輥壓制作的3英寸工業門專用導軌;導軌截面形狀帶有防脫鈎,以确保導輪在導軌内平穩運行;


    The guide rail is a 3-inch special guide for industrial doors made by hot-dip galvanized steel rollers with a cross-section shape of anti-decoupling to ensur

    e the smooth operation of the guide wheel in the guide rail.


    導軌護闆為δ=2mm熱鍍鋅鋼闆輥壓制作,護闆上設有門側密封橡膠的插槽及與導軌連接的安裝孔;


    The guide rail guard plate is made of hot-dip galvanized steel sheet roll with a groove for sealing rubber at the door side and an installation hole connected with the guide rail.


    導輪采Φ72mm工業門專用導輪,導輪材料為耐磨尼龍,内含滾輪軸承、運行平穩、無噪音。


    The guide wheel adopts special guide wheel for 72mm industrial door. The material of the guide wheel is wear-resistant nylon. It contains roller bearings. It runs smoothly and has no noise.


    其餘五金配件均采用熱鍍鋅鋼闆沖壓制作,尺寸準确,互換性好。


    The other hardware fittings are made by hot-dip galvanized steel sheet stamping, with accurate size and good interchangeability.

     

    沈陽電動滑升門提升結構



    門闆均采用0.4mm鍍鋁鋅彩色鋼闆,采用防夾手設計闆型,厚度為40mm,高度為500mm 表面烤漆處理,厚度為25~30μm ,門闆發泡密度≥42kg/m3,發泡材料采用聚氨酯環保型門闆系統料


    The door panels are all made of 0.4mm aluminium-galvanized colour steel plates with anti-splint design. The thickness is 40mm and the height is 500mm. The thickness is 25-30um. The foaming density of the door panels is more than 42kg/m3. The foaming materials are polyurethane environment-friendly door panels.
     

     

     

2345彩票代理
(蘇州福盛泰物流設備有限公司
東北辦事處)
電話:024-31081023
聯系人:于經理
網址:www.ilid.com.cn
版權所有:2345彩票代理
(蘇州福盛泰物流設備有限公司東北辦事處)
  
電話:024-31081023
聯系人:于經理
百度地圖 - 網站地圖 -