2345彩票代理歡迎您的到來!

2345彩票代理(蘇州福盛泰物流設備有限公司東北辦事處)
您現在的位置:首頁>>提升門動态 >> 「沈陽廠房提升門」如何讓電動提升門運行更加順暢

    「沈陽廠房提升門」如何讓電動提升門運行更加順暢

    作者:沈陽垂直提升門廠家   發布時間: 2019/7/31 9:48:29


  • 「沈陽廠房提升門」如何讓電動提升門運行更加順暢


    How to Make Electric Hoist Door Running Smoother in Shenyang Workshop

     



    廠房使用的電動提升門具有抗風性、保溫性能好,安裝方式多樣的優勢,更具廠房的空間特點,有多種提升方式。


    The electric lifting door used in the workshop has the advantages of wind resistance, good heat preservation performance and various installation methods, and has more space characteristics of the workshop.

     

    沈陽廠房提升門廠家




    門闆厚度從40mm到120mm不等,用戶根據廠房承重和需要達到的保溫要求來選擇,門闆外闆為0.326mm厚的鍍鋅彩鋼闆,内部填充聚氨酯保溫發泡,具有密度大重量輕,保溫效果好的特點。


    The thickness of door panels varies from 40 mm to 120 mm. Users choose the door panels according to the load-bearing capacity and the thermal insulation requirements to be met. The outer panels of the door panels are 0.326 mm thick galvanized coloured steel plate, and the interior is filled with polyurethane thermal insulation foam. The door panels have the characteristics of high density, light weight and good thermal insulation effect.


    關于提升門的驅動方式,以軸驅動(配重)式和平衡系統為主,兩種有着各自的優勢。


    As for the driving mode of lifting door, the main driving modes are shaft driving (counterweight) and balancing system, which have their respective advantages.


    在廠房提升門的使用過程中,難免會因為産品自身原因或操作不當,造成産品不能正常運行,或者運行不順暢的情況,您可按照以下方法進行的保養,維護。


    In the process of using the elevator door of the factory building, it is inevitable that due to the product's own reasons or improper operation, the product can not run normally or run smoothly. You can carry out maintenance and maintenance according to the following methods.

     

    沈陽保溫提升門定做




    「沈陽廠房提升門」如何讓電動提升門運行更加順暢


    How to Make Electric Hoist Door Running Smoother in Shenyang Workshop



    電動提升門要進行維護保養的步驟:


    he steps of maintenance of electric lifting door are as follows:


    1、電動提升門在應用的過程中,肯定是要連結控制器還有電壓的穩定,拒絕安裝在環境比較潮濕的地方,由于這樣會影響提升門的幫助,另外遙控器是不可以随便進行打開,如果門體的上面有着電線纏繞,打結等情況那麼肯定要優秀行處理好,那麼在提升門運行的時候也要注意通道有沒有堵塞,有沒有物體會阻礙門體下降等,如果有發明一定要先停止電機運作。


    1. In the process of application of electric lifting door, it must be connected with the controller and voltage stability, refuse to install in the humid environment, because this will affect the help of lifting door, and remote control can not be opened casually, if there are wires winding and knotting on the top of the door body, then affirmative. In order to handle it well, we should also pay attention to whether the passageway is blocked and whether objects will hinder the descent of the door when the lifting door is running. If there is an invention, we must stop the operation of the motor first.


    2、經常應用的電動提升門我們應該要對其檢查行程的開關,還要地行程的控制器加上潤滑油,這樣才能讓它一直連結好良好的運行,另外,如果操作人員如果需要進行手動來控制門體,那麼就要了解檢查器的運行情況,還要校對上下行程的開關位置,這個很重要,而且我們在檢查過程中一定要嚴防電動提升門或沖底或者反轉,如果在運行的時候發現緊急情況那麼應該要停止轉動,然後進行切斷電源。


    2. The frequently used electric lifting door should be checked by the switch of the stroke, and the controller of the stroke should be added with lubricating oil, so that it can be well connected all the time. In addition, if the operator needs to control the door manually, he should know the operation of the checker and check it. This is very important for the switch position of the upstream and downstream journey, and we must strictly guard against the electric lifting door or flushing bottom or reversing during the inspection process. If an emergency is found during operation, then we should stop turning, and then cut off the power supply.


    3、每一位專門經管的操作人員非常好要經常的做好檢查工作,對電動提各項門的手動開關還有手動升降裝修,進行檢查,這是為了防止在緊急情況下電動提升門會失靈,然後就會造成不必要的安全事故。


    3. Every operator who specializes in management should do a good job of checking very often. The manual switch and lifting decoration of electric lifting doors should be checked. This is to prevent the failure of electric lifting doors in emergencies, and then cause unnecessary safety accidents.

    4、經常性的對軌道進行及時的清理,這是很重要的,而且要連結軌道内部很潔淨,這樣才能讓軌道運行暢通,電動提升門的電機和傳動鍊接需要經常的去加潤滑劑,為了讓提升門的部件不會發現松動,那麼做好檢查是必要的,比如控制箱内器件和開關控制盒,緊固接線端口,緊固螺絲等,特别是提升門遇到灰塵污物後,按鈕卡住不能反彈以是也要對按鈕還有控制箱進行潔淨,這樣電動提升門就可以完美的連結運行暢通。


    4. It is very important to clean the track regularly and keep the track clean so that the track can run smoothly. The motor and transmission links of the electric hoist door need to be lubricated regularly. In order to keep the parts of the hoist door from loosening, it is necessary to do a good job of checking. For example, the devices in the control box and the switch control box, fastening the connection port, fastening the screw, etc. Especially when the lifting door encounters dust and dirt, the button can not rebound, so the button and the control box should also be cleaned, so that the electric lifting door can run smoothly and perfectly.
     

2345彩票代理
(蘇州福盛泰物流設備有限公司
東北辦事處)
電話:024-31081023
聯系人:于經理
網址:www.ilid.com.cn
版權所有:2345彩票代理
(蘇州福盛泰物流設備有限公司東北辦事處)
  
電話:024-31081023
聯系人:于經理
百度地圖 - 網站地圖 -